sipxezphone timeout error

Hi

I tried to configure sipxezphone in win-xp with voipuser.org
account. I couldnt get even dialtone. Its giving

EVENT_CATEGORY_LINESTATE::PROVISIONED::PROVISIONED_NORMAL:sip:prakash@voipuser.org
EVENT_CATEGORY_LINESTATE::REGISTERING::REGISTERING_NORMAL:sip:prakash@voipuser.org
EVENT_CATEGORY_LINESTATE::REGISTER_FAILED::TIMEOUT FAILURE:sip:prakash@voipuser.org

Could anyone got succeeded in configuring sipxezphone and able to make calls?
Help me out from the problem.

Prakash

Hi Prakash

Can you post the config info you are using (without your password)

Then we will be able to offer some suggestions

My config details are
Identity: sip:prakash@voipuser.org
Realm : voipuser.org
username : prakash
Password:*******
Proxy Server: sip.voipuser.org
Stun Server: stun.voipuser.org
Enable r port :1
AutoAnswerMode : 1

In this I tried with/without stun server, enable/disable r-Port etc
But always it says timeout error

Any help is appreciated,
Prakash

Sounds to me like you're behind a NAT device that will not work with STUN as the softphone is not getting the resitration reply back from the server.

Port forwarding 5060 and some RTP ports to the PC running the softphone will solve it, but may be a bit of a pain.

Not much we can do there. Commercial SIP based service providers will in this situation provide a proxy. We can't, as it's expensive to provision....

Dean

Hi
Could you just tell other alternates by how I can make things workable.
or Just tell how can I workaround thro' some port frwarding you mentioned.

Sincerely,
Prakash Narasimhan
Student, M.E (Microelectronic Systems)
Centre for Electronics Design and Technology (CEDT)
Indian Institute of Science
Bangalore-560012
Karnataka-India
Ph: 09448787632

I'm having problem like Prakash. I built and run my SipXezphone on Windows XP. I tried to integrate it with my Asterisk server, but nothing seems to work. My setting are as follows:

Identity:116@192.168.0.149
Realm : 192.168.0.149
username : 116
Password:password
Proxy Server: 192.168.0.149
Stun Server: <blank>
Enable r port :<blank>
AutoAnswerMode : <blank>

the msg that i got was "REGISTER_FAILED:sip:116@192.168.0.149"

i'm running out of time to complete it. I've been looking at the same problem for almost a week already. Would be appreciate if someone can guide me through.

Really need help on this matter. Hope anyone who is building and executing sipXezphone can guide me to sort the problem above. Tq so much