Flash Operator Panel

.
First of all I would like to thanks to all who help me set up my A@H 2.0 box.. its working not at all, but its working

but now, i was trying to use the Flash Operator Panel, every time I try to make a trasfer or any use.. ask me for a pass
I just enter amp111, (deffault pass) . but doesnt work.

do i need to set up something before use the Flash Operator Panel?

Default user password for the FOP is 'passw0rd' where the 0 is a zero.

If you don't like it you can change it by editing the security_code= line in /var/www/html/panel/op_server.cfg

I did it. but nothing

passw0rd
password
admin
amp111
PASS (my new password)
nothing work


here is my
op_server.cfg

[general]
manager_host=127.0.0.1
; user and secret for connecting to * manager
manager_user=admin
manager_secret=amp111
auth_md5=1
flash_dir=/var/www/html/panel
security_code=PASS
poll_interval=120
poll_voicemail=0
kill_zombies=0
debug=0
language=en
conference_context=conferences
barge_rooms=900-902
barge_muted=1
clid_format=(xxx)xxx-xxxx
clid_privacy=0
show_ip=1
rename_label_agentlogin=0
rename_label_callbacklogin=0
rename_label_wildcard=0
rename_to_agent_name=1
agent_status=0
rename_queue_member=0
change_led_agent=1
reverse_transfer=0
clicktodial_insecure=1
transfer_timeout= "0,No timeout|300,5 minutes|600,10 minutes|1200,20 minutes|2400,40 minutes|3000,50 minutes"
enable_restart = 0
voicemail_extension = 3000@features

My fault Should have added:-
You need to tell the rest of the system that you have amended the password, most reliable way is to restart AAH, but it should be picked up by submiting changes in inbound calls under AMP setup.
Do Not use re-read configs in the PHPeditor, it appears to break FOP completely!

FOP seems to be surprisingly difficult to get working properly and never works the same way twice!

So please forgive me if I simply offer the fixes I used. They may or may not work, you may need one, some or all and may even break it. Only thing I can offer is I needed all of them on my last installation and had to comment out the original settings. Time before I didn't comment the original settings and it worked

In Op_server file is the line:-
manager_host= Change this to whatever you use to access the panel, either the IP address or DNS name.
Also
web_hostname= Which may also be whatever you use to access the panel in your web browser.

If you have any form of firewall running between you and the server make sure port 4445 is open.

Hi,

op_server.cfg it's not all the time the conf file that it's used. I use to have the same problem on my xorcom box, and i fix it by editing the file /etc/amportal.conf. There is a field FOPPASSWORD. if you will compare the passwords, from here and from /var/www/html/panel/op_server.cfg, you will see that are different. I modified both passwords (2 B sure ), and it start working.

Hope that info it will usefull for you!

Johnutz

vberroa :

I did it. but nothing passw0rd password admin amp111 PASS (my new password) nothing work here is my op_server.cfg [general] manager_host=127.0.0.1 ; user and secret for connecting to * manager manager_user=admin manager_secret=amp111 auth_md5=1 flash_dir=/var/www/html/panel security_code=PASS poll_interval=120 poll_voicemail=0 kill_zombies=0 debug=0 language=en conference_context=conferences barge_rooms=900-902 barge_muted=1 clid_format=(xxx)xxx-xxxx clid_privacy=0 show_ip=1 rename_label_agentlogin=0 rename_label_callbacklogin=0 rename_label_wildcard=0 rename_to_agent_name=1 agent_status=0 rename_queue_member=0 change_led_agent=1 reverse_transfer=0 clicktodial_insecure=1 transfer_timeout= "0,No timeout|300,5 minutes|600,10 minutes|1200,20 minutes|2400,40 minutes|3000,50 minutes" enable_restart = 0 voicemail_extension = 3000@features