how to set the sipx PBX

when I install the sipx PBX in my computer,there are some problems.first,when there are internet set "DNS\FTP\DHCP"
I should slect the "*"to confirm to configure or I should to remove the "*"to select the option.
A bigger trouble is that when I finished the first step and reboot
then I must login to configure the last options.but I tried many times and the explicit prompt is "login incorrect.what is the problem?I'm confused.
anyone know this? I really very appreciate if anyone can point out my problem.thank you

Quote:

first,when there are internet set "DNS\FTP\DHCP" I should slect the "*"to confirm to configure or I should to remove the "*"to select the option.

The default is selected IE * meaning will be installed, NOTE do NOT have two DHCP's on the same network subnet (IE 255.255.255.0 / 255.0.0.0 or similar) as they will interfere with each other and cause network problems therefore make sure you router has it disabled is you use one.

Quote:

I must login to configure the last options.but I tried many times and the explicit prompt is "login incorrect.what is the problem?I'm confused.

If you look at the server screen its telling you to open a web browser on another PC and login to the web admin interface, this login will be the IP you assigned your sipX server (IE https://192.168.200.150:8443) note the port number on the end.

Username: superadmin
pin: This will be the password you set within the wizard configuration.

It is within here you set all sipX parameters.

Regards
Funboy