New help on Dial String for Pap2 for home use please....

New help on Dial String for Pap2 for home use please....

Is there someone other than Linksys that perhaps can answer a question related to this article on dial strings for the PAP2?
http://www.netphonedirectory.com/pap2_dialplan2.htm


Below is an example string:

(<:1780>[2-4]xxxxxxS0|*xx|<911:17804213333>S0|011[2-9]x.|1[2-9]xx[2-9]xxxxxx|1900xxxxxxx!)

Wanted to know how to change string so that if a 704 is dialed as an area code (US North Carolina), then a 1 is prefixed to the number so that the number dialed is 1704xxxxxxx?

Or if this cannot be done, then a 10 digit number is dialed I need the string to add a 1 in front of it making it an 11 digit number.

Most of the numbers stored on my phones for the 704 area code do not have a 1 prefixing them. But using my VOIP provider, it needs a one. The rest of my numbers outside of 704 area code have a one stored in the phones...



Thanks,
Peter

pcumming :

Below is an example string: (<:1780>[2-4]xxxxxxS0|*xx|<911:17804213333>S0|011[2-9]x.|1[2-9]xx[2-9]xxxxxx|1900xxxxxxx!) Wanted to know how to change string so that if a 704 is dialed as an area code (US North Carolina), then a 1 is prefixed to the number so that the number dialed is 1704xxxxxxx?

What about:

Code:

(<:1>704xxxxxxxS0|<:1780>[2-4]xxxxxxS0|*xx|<911:17804213333>S0|011[2-9]x.|1[2-9]xx[2-9]xxxxxx|1900xxxxxxx!)

Will try. Thanks so much.

Now I just need a better RoadRunner signal. Was okay today but fluctuates. Got new modem. Good for a day. They are coming out Thursday to replace some equipment in their box or run yet another new cable to my house. Personally I think I am on a bad hop to their switch..

Peter