VoIPuser Settings for Siemens S450IP

Can anyone help with settings for the Siemens S450IP? I've entered everything in various combinations/formats and can't successfully get registered. I'm registered fine with two other providers, so I know everything is working correctly. So far I have the following:

Authentication Name: twynne
Authentication Password: my password
Username: twynne
Display Name: Tom Wynne

Domain: voipuser.org
Proxy server: sip.voipuser.org
Proxy port; 5060
Registrar server: sip.voipuser.org
Registrar port: 5060
Stun enabled: No
Outbound proxy: <blank> (have also tried with it specified)

I've also tried twynne [!at] voipuser.org (replace the [!at] with a @) for both auth name and username.

Thanks all,

Tom

Try this:

Code:

Domain: voipuser.org Proxy server: sip.voipuser.org Proxy port; 5060 Registrar server: Registrar port: 5060 Stun enabled: yes Outbound proxy:

Use stun.voipuser.org as the STUN server.

That didn't work, but with STUN enabled and the registrar server added back in it now registers.

Thanks,

Tom

I'm having the same problems setting up my S450IP with VoipUser.

I've used the connections settings as above (substituting my own user name and password obviously!) and have, in turn, disabled STUN and outbound proxy (following advice on another thread) but still now joy. The settings are pretty basic so that's not a lot else to change.

I have 2 other voip providers configured and working btw. The router is a Netgear FWP114P.

I'm also having trouble configuring a Siemens phone, S685ip.

Have tried all of the above but still can't register.

please help!